Recent Entries

  • What kinds of liquid silicone masks are available on the market

      Affected by the new crown epidemic, the global supply and demand gap of ventilators is increasing. As the epidemic spreads globally, countries are introducing a large number of ventilators. Respiratory masks and other silicone accessories used with ventilators are also listed as a global sup...
  • Relevant introduction of molding shrinkage rate of syringe moul

      Today's editor mainly introduces to you how to prevent the molding shrinkage error related content of syringe mould. Since the shrinkage rate will change due to the injection pressure, for single-cavity molds, the cavity pressure in the cavity should be as much as possible. Unanimous. As for...
  • I.V. Catheters reduces the workload of nurses

      The intravenous I.V. Catheters are also called intravenous trocar. The core components include a flexible catheter/cannula that can be indwelled in a blood vessel, and a stainless steel puncture guide needle core. When in use, the catheter and the needle core are punctured into the blood ves...
  • The development of medical molds

      Today we will introduce the medical mould products: Compared with other mould processing, in the process of processing medical device moulds, basically they are successfully applied to individuals or some other aspects. However, when we process this kind of moulds, compared with other mould...
  • Test principle of infusion bag permeability tester

      Syringe Mould can be made of plastic or all-glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized with an autoclave, but because the processing cost of plastic syringes is low, most modern medical syringes are made of plastic,...
  • Gynecology Mould often used in gynecological examinations

      I believe that many girls do not like using Vaginal Speculum Mould when they are doing gynecological examinations. When obstetricians and gynecologists used the vaginal dilator to check, some girls even felt discomfort and pain. Will the vaginal dilator for female gynecological examinations ...
  • What are the advantages of safety needle syringes?

      A safety syringe is an injection syringe with its own safety mechanism. The Safety Needle on the safety syringe is detachable or fixed. In some types, the user puts the protective device on the needle after the injection, or the needle can be retracted into the barrel. These mechanisms can b...
  • The specifications of disposable syringes are measured on a sca

      The syringe mould includes a fixed-side take-and-attach plate, a movable-side take-and-attach plate, a positioning ring and a gate sleeve. The mould opening rod bolts are threadedly connected with the movable side mould opening rod, the movable side mould opening rod is movably installed in ...
  • Various influencing factors of syringe mould

    Syringe Mould design and manufacturing are closely related to plastic processing. The success or failure of plastic processing depends largely on the effect of mold design and mold manufacturing quality, and plastic mold design is based on correct plastic product design. The structural elements t...
  • Shengjiu Oxygen Mask Mould is Ergonomic

      Because the curled part of the oxygen mask mould is in direct contact with the pilot’s facial skin, it is required to be comfortable, free of allergic reactions and special odors. From the perspective of the oxygen masks currently in service and under development in the United Kingdom,...
  • What is a medical injection mold?

      What is a medical injection mold? Many people are curious. The editor estimates that there may be many people who even have molds, not to mention medical injection molds. Some have only heard of but have not seen them, let alone know them. Today, I will give you all Popularize some basic kno...
  • What are the technical parameters of the suppository mold?

    The suppository mold is a gynecology mould precision manufactured by Seiko. Suppository molds have many types, complete models, high precision, accurate dosage, and corrosion resistance. Suppository molds can be divided into bullet-shaped, torpedo-shaped, and duckbill-shaped. It is a university, co...
  • Correct use steps of oxygen mask

      The oxygen mask is a mask for regular oxygen inhalation. Compared with oxygen inhalation through a nasal catheter, oxygen inhalation through a mask is more efficient, can provide a moderate oxygen concentration, and can be adjusted as needed to partially or completely avoid repeated breathin...
  • Blood collection needle mould of disposable medical mould

      Shengjiu Mould introduces several common types of blood collection needle mould. 1. Split blood collection needle mould Split blood collection needle mould is a disposable blood collection needle mould commonly used clinically. It basically replaces the syringe blood collection method used...
  • Shengjiu medical mould is developing with high quality

      In recent years, with the rapid development of my country's automobile industry, 3C, home appliances, medical care, building materials and other industries, the medical mould processing industry has achieved rapid development. Among them, sophisticated mold equipment and high-quality cutting...
  • The development status of China's medical mold

      Talking about the development prospects of China's Medical Mould industry. 1. If you want to make a good Syringe Mould, you must first choose a good mold company. To make a pair of medical molds, some selection conditions are still needed. The scale of the mold company's equipment, the expe...
  • Processing method of syringe mold cavity

    Precautions for processing plastic Syringe Mould cavity are as follows. In the CNC milling of cavity parts, from the rough shape of the regular shape to the part processing before the finishing treatment, since the cavity is usually manufactured with copper electrodes matched with it, the mi...
  • Tips For Using Three Way Stopcock

    Because the   Three Way Stopcock  is convenient to obtain materials, simple to operate, and economical, it has a variety of magical functions in addition to intravenous infusion, which brings many conveniences to patient care and is easy to be accepted by patients. Therefore, the thre...
  • Plastic Mould: What Moulding Process?

    With the rapid development of the injection mould industry, the number of companies that provide plastic mould sample processing is increasing, and they can provide better services to customers with different requirements. In the injection moulding process, different moulding methods can b...
  • Oxygen Mask Mould-Hi-Ox-High Fio2 Oxygen Mask Operation

    To maximize the release of delivered oxygen, the breathing holes on the mask should be removed. These holes can also dilute the 3-valve system that excites oxygen to separate the oxygen in the air bag from the exhalation path to the room. The opening pressure of Hi-Ox's third dilution valve is sligh...
  • Oxygen Mask Mould-5 Medical Oxygen Mask Features

    (1) Oxygen mask: It is mainly composed of nose clip, mask, elastic band, mask connector, oxygen tube, conical connector, etc. (2) Adjustable mask: mainly composed of nose clip, mask, oxygen concentration regulator, elastic band, conical joint, conversion joint, atomizing joint, etc .; (3) Non-resp...
  • Three Way Stopcock Market Application Areas

    The stopcock is a ball valve used to control the flow of liquid or gas in the laboratory. They are available in different forms, where the three-way stopcock is made of polycarbonate and has numerous channels for multiple infusion treatments. The three-way stopcock can withstand pressures up to 5 ba...
  • Structural Characteristics Of Three Way Stopcock

    The plug valve is a ball valve used to control the flow of liquid or gas. It is rough and its use is limited to switching applications. There are many types of plug valves. Some of them are needle valves, vacuum stopcock valves, burette stopcock valves, 1, 2 and 3 way valve stopcock valves, and many...
  • Core Processing In Syringe Mould

    What are the precautions for plastic injection mould cavity processing? What are the main items of core processing? Yuhuan Shengjiu Mould Co., Ltd. explained:   ① In the CNC milling process of cavity parts, from regular shape blanks to parts processing before finishing (mainly referring to po...