Before you start cleaning the Stainless Steel Submersible Sewag

  •   Steps to clean up Stainless Steel Submersible Sewage Pump

      Before you start cleaning the Stainless Steel Submersible Sewage Pump, please put safety first. Always unplug the Stainless Steel Submersible Sewage Pump or turn off the power on the circuit breaker. Make sure that no one in your home is operating any equipment that may be discharged into the sump, such as washing machines, or any basement water that flows into the sump, and always wear protective gloves when handling greywater. Prepare the area for cleaning and collect cleaning supplies such as buckets, plastic scrapers, and large plastic cloths to protect the floor. Then follow the steps below:

      After checking to make sure that your Stainless Steel Submersible Sewage Pump is turned off, disconnect the pump from the drain pipe.

      Wrap your pump with plastic to prevent dripping and bring it outside. Use a garden hose to flush any dirt or sludge on the surface of the pump. It may be necessary to use a plastic scraper or putty knife to clean the Stainless Steel Submersible Sewage Pump and remove clumped debris. Keep in a safe place to dry.

      Use a store vacuum cleaner to drain any stagnant water from the sump.

      If you have a check valve that can be disassembled, remove it carefully and let the water drain from the check valve before removing it. Rinse the valve thoroughly with water, then dry and reassemble.

      After thorough drying, reconnect the pump to the discharge pipe.

      Small Submersible Pump is also our product, welcome to consult and purchase.