What are the advantages of Rapid Splitter

  •   Rapid Splitter, as we know it, consists of a base, a motor, a feeding funnel, a vibration device, and a discharge port. The fixed gear plate and the movable gear plate of the crusher are arranged in concentric circles with different diameters to achieve the crushing effect on the material.
       A large amount of dust will be generated during the crushing process, so the equipment is generally equipped with dust collection and dust removal equipment. The crusher and power unit should be installed firmly. If the wood shredder is fixed for a long time, it should be fixed on the cement foundation; if the shredder is active, the unit should be installed on a base made of angle iron, and the pulley grooves of the power engine (diesel engine or motor) and the shredder should be in the On the same anti-plane. Wood shredders are mainly suitable for destructive processing of medium and low hardness materials, such as oil, viscosity, heat sensitivity and fiber. The fineness is adjusted between 30-325 mesh. It has the advantages of high output value, fine particle size, low noise, low energy consumption, simple maintenance, and convenient installation. It is suitable for destructive processing of low-hardness materials such as chemicals, medicine, food, feed, and non-metallic minerals.

      After installing the grinder, check the fastening of each fastener, if there is any looseness, tighten it. Check whether the belt is tight. Before starting the wood shredder, roll the rotor by hand to check whether the teeth, hammer, and rotor are sensitive and reliable, whether the shell is raised, whether the rotation direction of the rotor is consistent with the direction shown by the arrow of the machine, and whether the power machine and the shredder are smoothly protruding. Do not change the belt pulley at will, so as to avoid the explosion of the damage chamber due to the excessively high speed, or the working efficiency of the crusher is affected by the excessively low speed.
       After starting, the grinder should run idling for 2 to 3 minutes before feeding. As the shear is strengthened, the damage of the fiber material may be higher than that of ordinary equipment. The screen is easy to install, firmly positioned, and all plug-in. The service life of the ring screen is longer. The built-in motor is designed to reduce the weight of the machine and effectively reduce equipment noise.
       Pay attention to the running status of Log Splitter at all times during operation, feed evenly, and don't overload it for a long time. If vibration, noise, bearing and machine body temperature are too high, or spraying outwards, it should be shut down immediately for inspection, and the operation should be continued after troubleshooting.