The Relationship Between Ultra Fine Mist Sprayer And Covid-19

  •   Routine cleaning and sanitising of public spaces is an essential part of preventing the spread of the current coronavirius known as COVID-19. Are you doing your bit to reduce the spread COVID-19 in your public spaces? Here are some efficiency tips and tools to get started.

      CLEAN BEFORE DISINFECTING

      Spraying disinfectant over surfaces is important to kill germs, however it is also important to deep clean surfaces first to remove the soil load to ensure the disinfectant has maximum effect. The Australian Government 'Environmental Cleaning and Disinfection Principles for COVID-19' states that "organic matter can inactivate many disinfectants".

      To remove soil build up in larger outdoor public areas, many local government authorities (LGA's) use a wash down trailer with a 1,000L or 2,000L tank and a good length hose reel for maximum efficiency. If you already have a Rapid Spray tanker trailer and would like to be able to use diluted bleach as recommended by the government, a simple upgrade to Viton Seals is all that is needed. Alternatively, if you are like many councils who already own a pressure cleaning trailer or pressure wash skid unit for the back of a ute, then these are also handy pieces of equipment for thoroughly cleaning outdoor areas prior to disinfecting.

      CONTROL THE SPRAY

      When spraying disinfectant, you want a nice fine mist that entirely covers the surface without running off and wasting the solution, or leaving excess moisture. This can be achieved by using a good quality industrial grade compression ultra fine mist sprayer manufacturer with components which can handle disinfectant or aggressive chemicals with an adjustable nozzle. This will ensure you can control the droplet size which in turn controls the amount of disinfectant.

      For larger, flat surfaces such as walls and floors, it is much more efficient to use a multiple nozzle boom attachment to the spray wand so you can walk back and forth, or sweep the wand vertically (like using a paint roller) with confidence you are getting complete coverage of the surface.

      DETERGENT VS. BLEACH

      For more sensitive areas where a detergent or alcohol based solution is recommended rather than a bleach solution, however as the hoses and seals will not last as long, it is not recommended to use with bleach solutions.

      COVERING LARGE AREAS

      One of the most efficient ways to spray disinfectant in large areas and open spaces after cleaning, is to use a sprayer that has the combination of a 40bar pump and a turbo atomiser gun. This will give a nice fine mist like a backpack sprayer but with a higher output to allow the operator to cover more surface area in less time. The beauty of this combination is the turbo atomiser gun allows the operator to adjust the spray pattern with the flick of a leaver to a jet spray if they need some penetration to remove soil or organic matter build up. Simply switch to jet and blast the build up away and then switch back to mist to completely cover the surface again.

      Please remember to always practice safe chemical spraying as instructed by the chemical manufacturer and definitely don't use in public spaces if it contains any trace of poisons.

        As a professional trigger sprayer factory,we accept all kinds of window hardware orders, welcome to consult.