What Is The Power Of Rock Button Bits

  •      The following problems should be paid attention to during the use of Water Well Drilling Tools: (1) Do not suspend the loop for a long time, and do not crush the loop. (2) Do not rotate the pipe string when the drill bit is stuck to prevent the screw water cap from being reversed and the mandrel from falling into the well. (3) The wellhead should be equipped with a self-sealing well sealer to prevent small items from falling into the well. (4) The upper tank and the backwater sedimentation tank should be used separately, and the returned well washing fluid should be used after sedimentation. (5) The well should be fully flushed before and after the single root is connected to ensure that there is no drilling cuttings in the well. (6) The pump pressure drops during drilling. Excluding ground factors, it may be a leak of the drilling tool, a puncture of the bypass valve hole, or the screw housing inverted. The drilling should be started immediately. (7) When the pump pressure suddenly rises during drilling, the motor or drive shaft may be stuck or the drill bit may be blocked. At this time, the well cannot be backwashed, and the drilling should be started immediately. The structure and function of the motor assembly (1) Structure: The motor assembly is composed of a stator and a rotor. The stator is a rigid rubber sleeve with a double-head or multi-head spiral cavity vulcanized in a refined steel cylinder. The rotor is a single-head or multi-head helical steel shaft. After being processed by alloy steel, the surface is plated with a layer of hard chromium that is beneficial to corrosion and wear resistance. The clearance between the stator and the rotor is controlled by chromium plating. (2) Function: The hydraulic energy of the workover fluid pumped by the mud pump drives the rotor to rotate, and provides rotating mechanical energy for the drill bit to break the rock. The motor assembly is the power source of Rock Button Bits.