Introduction To The Washing Of 8-hydroxyquinoline Copper

    1. Cuprous Chloride physical decontamination method

    Mainly use natural conditions such as ventilation, sun, rain, etc. to make the poison evaporate and be hydrolyzed, so that the poison gradually reduces its toxicity or is gradually destroyed and loses its toxicity. Cotton yarn, gauze, etc. can be impregnated with solvents such as gasoline, kerosene and alcohol to dissolve and scrub the poison on the surface of the poisonous body. The liquid and solid pollution sources can be buried or removed. But burying must add a lot of bleaching powder. The advantage of physical decontamination method is convenient disposal and easy implementation.
    Two, chemical decontamination method
    The chemical decontamination method uses the decontamination agent to chemically react with the poison source or the poisonous body to produce a non-toxic or very toxic product. It has the characteristics of thorough disinfection and good environmental protection, but pay attention to the decontamination agent and poison Whether the chemical reaction produces new toxic substances to prevent the reaction from happening again, the chemical decontamination of poisonous accidents requires the use of equipment and equipment, which consumes a large amount of decontamination agents and the cost is high. In actual decontamination, chemical and physical methods are generally used at the same time. In order to make the decontamination agent effective in chemical emergencies, the choice of 8-hydroxyquinoline Copper's decontamination agent must conform to the "fast decontamination speed" , Decontamination principle of thorough decontamination effect, small amount of decontamination agent, low price, and decontamination agent itself will not corrode personnel and equipment."