Most plastic garden sprayers use pump components to generate in

  •   The plastic garden sprayer consists of a water tank, pump components, hoses, and nozzles, which can use herbicides and insecticides in your garden. Using chemicals under the pressure of the pump assembly, your plastic garden sprayer allows you to control the spray distance and pattern of the liquid so that the chemicals reach their target area, such as hanging under the leaves. Over time, there are some problems with the sprayer, which may only require basic maintenance solutions to work properly.


      If you find any hoses, nozzles, or valves leaking when connected, you must immediately stop using the sprayer and release its internal pressure through the safety valve, because the chemicals dripping throughout the yard may harm nearby animals and plants. Each of these connections has an O-ring or gasket to cushion the internal connection points. Over time, these gaskets can shift or break. Once the leaking gasket has been identified, its structure should be thoroughly observed. If it breaks, it needs to be replaced. Otherwise, the quick repositioning gasket should fix the leakage area.


      Over time, tiny dirt particles can clog nozzles and hoses, especially if the water tank is not thoroughly cleaned. If you find that the spray pattern is blocked, it may be an obstruction. After releasing the tank pressure with the safety valve, you must remove the problematic part (such as the nozzle) and let the water flow through. Use standard garden plug hoses to fasten the parts quickly. It is not a good habit to insert tools into the various parts of the sprayer or use a high-pressure water machine, because the parts of the sprayer are easily broken by hard tools and quickly concentrated water.

      No stress

      Most plastic garden sprayers use pump components to generate internal pressure and then move the pump handle up and down to increase the pressure. However, your sprayer may show poor pressure only by observing the flow of water, and not force it out of the nozzle at all. Opening the fuel tank and removing the pump assembly is the best way to isolate the problem. Water seeping into the pump indicates damaged gaskets or broken pump components. Replacement of broken or worn parts can restore the sprayer to normal use.

      Problem prevention

      The plastic garden sprayer can stand the test of time after regular maintenance. Spend some time checking the agricultural mist sprayer before the growth period to avoid problems. Any dry gaskets found the need to be lubricated, usually with petroleum jelly. However, your specific user manual will provide special lubrication requirements. Keep the gasket lubricated to prevent road leaks. If they are cracked or damaged due to winter storage, you can also replace them. In addition, flushing and flushing the water tank between chemical applications prevent corrosion from causing internal damage