Updates

• 
  Jin hong wrote a new blog entry:

  

  An Recommendation of Injection Plastic Mold

  1) Fast production and highly efficient. Injection moulding from Injection mold maker can produce an incredible amount of parts per hour. Speed depends on the complexity and size of the mould, anywhere between 15-120 seconds per cycle time.
  2) Low labour...

  • #Injection mold maker Plastic Compression Springs

  • 11 hours ago
• 
  Jin hong wrote a new blog entry:

  

  We Can Help You Know Cost Of An Injection Plastic Mold

  In general, an Injection plastic mold should cost anywhere between $1,000 and $80,000, the average cost is around $12,000. This investment is only part of the story, however, as another factor is just as important; cost per part.
  The cost per partWhen it...

  • #Injection plastic mold Ejector sleeve

  • Sep 2
• 
  Jin hong wrote a new blog entry:

  

  An Introduction of Attentions of Plastic Mold Parts

   
  Plastics Guide bush are much softer and less rigid than metals. The sectional shapes and sizes should be carefully chosen in this regard. If needed, a high section modulus can be achieved using principles similar to that used in I-beams and tubes...

  • #Guide bush Mold parts

  • Aug 27
• 
  Jin hong created a new group:

  We Are One of The Injection Mold Maker

  Injection mold maker said that injection molding is the process of making custom plastic parts by injecting molten plastic material at high pressure into a metal mold. Just like other forms of plastic molding, after the molten plastic is injected into...  moreInjection mold maker said that injection molding is the process of making custom plastic parts by injecting molten plastic material at high pressure into a metal mold. Just like other forms of plastic molding, after the molten plastic is injected into the mold, the mold is cooled and opened to reveal a solid plastic part.
  
  The process is similar to a Jello mold which is filled then cooled to create the final product.
  
  ​Common Uses for Injection Molding
  Injection molding is commonly used for making very high volume custom plastic parts. Large injection molding machines can mold car parts. Smaller machines can produce very precise plastic parts for surgical applications. In addition, there are many types of plastic resins and additives that can be used in the injection molding process, increasing its flexibility for designers and engineers.
  
  ​Injection molds, which are usually made from steel or aluminum, carry a hefty cost. However, the cost per part is very economical if you need several thousand...    less

  • Aug 19
• 
  Jin hong wrote a new blog entry:

  

  An Introduction of Injection Plastic Mold Defects

  Most defects in Injection plastic mold are related to either the flow of the melted material or its non-uniform cooling rate during solidification.
  Here is a list of defects to keep in mind while designing a part for injection molding. In the next sectio...

  • #Injection plastic mold Plastic mold factory

  • Aug 13
• 
  Jin hong created a new group:

  Injection Plastic Mold Has Amazing Features

  The Injection plastic mold, one of the most vital process required, is required to taken into utilize to shape plastic using a rigid frame or mould. Not to mention the way of using technique that allows for the creation of objects of all shapes and sizes...  moreThe Injection plastic mold, one of the most vital process required, is required to taken into utilize to shape plastic using a rigid frame or mould. Not to mention the way of using technique that allows for the creation of objects of all shapes and sizes with huge design flexibility for both simple and highly complex designs.
  
  It starts with advanced techniques and placing liquid polymer into a hollow mould so that the polymer can take its shape – mainly with different ranges of pressure and heat required. You will get access to different plastic molding techniques that include rotational molding, injection molding, blow molding and compression molding to name just a few.
  
  Plastic design
  
  Plastic design process is not an easy part of the entire process. It is complicated and need assistance from top engineers and expert – who work in a planned way by focusing on various important things. Professionals who are working for plastic designs also remove uneven wall thickness by digging out material of...    less

  • Jul 29
• 
  Jin hong created a new group:

  An Introduction of Injection Mold Parts Coating Application

  The application method for HC (Heat Cure) and HCF (food-grade Heat Cure) injection Mold parts coatings is the same, done at room temperature in the tool room. You can use a microfiber swab or cloth, depending on the actual mold configuration.
  
  Apply a...  moreThe application method for HC (Heat Cure) and HCF (food-grade Heat Cure) injection Mold parts coatings is the same, done at room temperature in the tool room. You can use a microfiber swab or cloth, depending on the actual mold configuration.
  
  Apply a small amount of coating to the swab or cloth and apply to the surface in one direction. When this is done correctly, the surface should look wet as if you rubbed an alcohol wipe over the surface. If the swab or cloth dries out, reapply coating.
  
  After you apply the coating in one direction, apply a second coating in a perpendicular direction over the same area. The reason for the second coat and change in direction is to make sure the entire surface is coated well, as the coating can be hard to see during application. Make sure there are no streaks or pooling, as that can lead to a sticky residue once cured.
  
  Next, with a standard heat gun, begin the curing process. Set the gun to 550-600 degrees Fahrenheit. With the gun 4-6 inches from the surface,...    less

  • Jul 9
• 
  Jin hong created a new group:

  Types of Plastic Compression Springs Are Introduced

  There are a variety of Plastic Compression Springs on the market that vary in length, size and material. When choosing a spring for your valve part, it is important that you review the choices on offer so that you can enjoy an optimum performance from...  moreThere are a variety of Plastic Compression Springs on the market that vary in length, size and material. When choosing a spring for your valve part, it is important that you review the choices on offer so that you can enjoy an optimum performance from your valve part.
  
  It is important that whenever you make changes to other parts of the valve that you review the effectiveness of the spring, as any slight hint of incompatibility will hinder productivity and effectiveness.
  
  The most common type of coil is the flat wire spring and they are widely used in many industries that use valve parts, including the pharmaceutical industry and the food industry.
  
  FLAT WIRE SPRINGS
  Flat Wire Springs | KB DeltaCompression flat wire springs are an essential component of a valve that provides optimum performance and durability. When looking at a flat wire spring you could be forgiven for thinking that they will not work the same as a standard spring, as they look a little off, but they are extremely strong and have the...    less

  • Jun 18
• 
  Jin hong created a new group:

  Plastic Compression Springs Becomes

  　　With the development of Plastic Compression Springsapplication technology, more requirements are put forward for plastic compression springs materials. Mainly in terms of improving fatigue life and anti-relaxation performance under high stress;...  more　　With the development of Plastic Compression Springsapplication technology, more requirements are put forward for plastic compression springs materials. Mainly in terms of improving fatigue life and anti-relaxation performance under high stress; secondly, according to different uses, it is required to have corrosion resistance, non-magnetic, electrical conductivity, wear resistance, heat resistance, etc. To this end, in addition to the development of new varieties of plastic compression springs materials, beneficial results have been achieved in terms of strict control of chemical composition, reduction of non-metallic inclusions, and improvement of surface quality and dimensional accuracy.
  
  　　(1) Development of plastic compression springs steel production technology To improve the quality of plastic compression springs steel, industrially developed China has generally adopted out-of-furnace refining technology, continuous casting technology, new rolling, and online automatic detection and...    less

  • Jun 10
• 
  Jin hong created a new group:

  Injection Mold Maker Tells Important Features of Products

  Plastic molding, one of the most vital process required, is required to taken into utilize to shape plastic using a rigid frame or mould. Not to mention the way of using technique that allows for the creation of objects of all shapes and sizes with huge...  morePlastic molding, one of the most vital process required, is required to taken into utilize to shape plastic using a rigid frame or mould. Not to mention the way of using technique that allows for the creation of objects of all shapes and sizes with huge design flexibility for both simple and highly complex designs. Injection mold maker would like to tell you more.
  
  It starts with advanced techniques and placing liquid polymer into a hollow mould so that the polymer can take its shape – mainly with different ranges of pressure and heat required. You will get access to different plastic molding techniques that include rotational molding, injection molding, blow molding and compression molding to name just a few.
  
  Plastic design
  
  Plastic design process is not an easy part of the entire process. It is complicated and need assistance from top engineers and expert – who work in a planned way by focusing on various important things. Professionals who are working for plastic designs also remove uneven...    less

  • Jun 3
• 
  Jin hong wrote a new blog entry:

  

  Know A Brief History of Plastic Injection Mold Parts

  When you think of the great inventions of modern history you probably think of automobiles, airplanes, computers, and other revolutionary innovations. While these developments are vital, have you ever considered the multifaceted manufacturing processes, m...

  • #Guide bush Mold parts

  • May 27
• 
  Jin hong created a new group:

  

  We Are One Of the Injection Mold Maker

  In this interview, Injection mold maker explains some of the injection molding issues that can be identified and solved with design for manufacturability. Kurt is a Mold Designer at Crescent Industries. He has decades of experience designing custom...  moreIn this interview, Injection mold maker explains some of the injection molding issues that can be identified and solved with design for manufacturability. Kurt is a Mold Designer at Crescent Industries. He has decades of experience designing custom plastic injection molds, coordinating with manufacturing personnel on mold designs, and working research and development personnel to execute and implement new injection molding projects.
  
  Speed to market is obviously a huge focus for manufacturers. How can we justify the time needed to go through the design for manufacturing steps and simulation? What are the key benefits for taking the time to conduct the DFM process?
  
  The justification comes when you consider all of the time that will be saved in the long run. That upfront time is almost always considerably less than the time it takes to make corrections later.
  
  Injection molding is a great manufacturing process, but just like any manufacturing process, for it to work as efficiently as possible,...    less

  • May 27
• 
  Jin hong created a new group:

  Injection Mold Maker Would Give You More Details

  If you’ve ever flipped open a bottle of ketchup or tube of toothpaste, you’ve used a living hinge. A living hinge introduced by Injection mold maker is formed as an extension of the base and cap material, which in many cases is polypropylene plastic....  moreIf you’ve ever flipped open a bottle of ketchup or tube of toothpaste, you’ve used a living hinge. A living hinge introduced by Injection mold maker is formed as an extension of the base and cap material, which in many cases is polypropylene plastic. This thin piece of material between the base and cap is flexible, allowing the cap to be bent out of the way as the contents of the container are dispensed and then returned to the closed position. Living hinges can be created in a number of ways, but one of the most cost-effective methods is plastic injection molding.
  
  Types of Living Hinges
  There are different types of living hinge, including:
  
  Straight hinge. The simplest form of living hinge, these can be short or long, and can also be segmented (three short segments that work together as one hinge, for example).
  Butterfly hinge. These hinges provide what is known as “bistable” hinge action. This means that the cap will snap either to the open or closed position. The advantage with this type...    less

  • May 20
• 
  Jin hong created a new group:

  Injection Mold Maker Answers Basic Questions

  While it is true that a custom plastic injection molder could prepare a quote from just a CAD drawing, or in some cases a hand-drawn two dimensional drawing, you are most likely adding unnecessary expense by not preparing a few essential items beforehand...  moreWhile it is true that a custom plastic injection molder could prepare a quote from just a CAD drawing, or in some cases a hand-drawn two dimensional drawing, you are most likely adding unnecessary expense by not preparing a few essential items beforehand to provide more information for your molder.
  
  5 Essentials For Your Best Plastic Injection Molding Quote
  When any plastic injection molder quotes a project, there are a few essentials they look for from a customer: a drawing, the application or use case, desired material, quantities, and finishing touches. Injection mold maker would like to introduce in details!
  
  A Drawing
  Seems pretty basic, right? Still, it’s important to point out that only having a description of the part available can leave a lot to the imagination, and words can be interpreted very differently from person-to-person. The small details you may consider insignificant could lead to significant differences in the tooling/mold cost. That’s why it’s crucial to have at leaset a...    less

  • May 14
• 
  Jin hong created a new group:

  Common Gates Introduced By Injection Mold Maker

  Many of the most common gates used with plastic injection molding are referred to as manually trimmed gates. They are called this because a secondary finishing process must be used after the part has cooled and been removed from the mold to remove excess...  moreMany of the most common gates used with plastic injection molding are referred to as manually trimmed gates. They are called this because a secondary finishing process must be used after the part has cooled and been removed from the mold to remove excess plastic and trim off the gates to create the finished part. Injection mold maker is willing to introduce these things in detail.
  
  Manually trimmed gates are typically used when you have larger gates that automated processes cannot remove without damaging the part. They are also used when working with certain types of plastics that could be damaged because they could be damaged from high shear rates common with automated trimming.
  
  There are other types of production processes and molding designs where manually trimming is better than automated trimming as well. Some common gate types used with plastic injection molding include:
  
  Edge Gate – An edge gate is located on the edge of the mold. It is frequently used when making square, rectangular, and...    less

  • May 7