Get Together in Groups
Create and join interest based Groups. Bring people together.
Create New Group
-
1
The pp compression fitting is user-friendly, easy to install and have many purposes. These fittings aren’t normally used in new constructions but renovation projects. The pp compression fitting are ingenious because you can use them in places where... moreThe pp compression fitting is user-friendly, easy to install and have many purposes. These fittings aren’t normally used in new constructions but renovation projects. The pp compression fitting are ingenious because you can use them in places where welding isn’t an option. Also, compression fittings can be used on leaky pipes such as broken water lines in an emergency situation.
Step 1: A PP COMPRESSION FITTING
Alright, these fittings are composed of 3 parts, the valve in this case, a sleeve and a retainer nut. All of these work together to make a solid leak free connection.
Step 2: TOOLS/MATERIALS FOR THE JOB
You’ll be needing some tools and materials to install these the correct way, starting with either 2 open end wrenches the size of the retainer nuts or 2 adjustable wrenches, and I always like to install a bit of pipe dope to lubricate and seal my connections, so I’ll be using my trusty can of pipe dope.
Step 3: PREPPING THE PIPE/FITTING
So the first thing to do is to ensure that you... less
led by
fitting tony
-
1
Follow this steps and find out what size your kid needs for his new boots:
Measure each foot, while your kid is standing still. Make sure the toes are straight out and don't let your kid curl his fingers. The size of the biggest foot is the one you need... moreFollow this steps and find out what size your kid needs for his new boots:
Measure each foot, while your kid is standing still. Make sure the toes are straight out and don't let your kid curl his fingers. The size of the biggest foot is the one you need to take into consideration.
Use this chart for shoe sizes to convert the measurements into a size.
If the measurements fir Waterproof rainboots aren't a perfect fit for a size, then your kid is between two sizes. The biggest one is probably the one you need. Boots will be worn with thick socks hence some extra room to fit them is necessary.
Ask your kid to try the boots on and let him walk around for a bit. If the boots are too tight, your little one will have difficulties walking casually around. If the boots are too large, he can trip or feel like there's too much space in front. If the heel is moving up and down while walking or he can take his shoes off without unzippering or untighten his laces, then the shoes are probably too big for... less
led by
hu jin
-
1
A few days ago, the cold wave hit and there was a lot of rain, and these few days are returning to the southern sky, so the tacky sublimation paper is very easy to get damp, so how can we avoid the tacky sublimation paper from getting damp when returning... moreA few days ago, the cold wave hit and there was a lot of rain, and these few days are returning to the southern sky, so the tacky sublimation paper is very easy to get damp, so how can we avoid the tacky sublimation paper from getting damp when returning to the south? Let the heat transfer label manufacturers talks about it for you.
1. If you find that the tacky sublimation paper is damp, it is best to use a hair dryer or blow it in a ventilated place to let the tacky sublimation paper dry.
2. Try not to expose it to the sun, as this will cause deformation of the tacky sublimation paper, and will also cause the tacky sublimation paper to jam during use.
3. In the face of places where the phenomenon of returning to the sky often occurs, try to choose a better quality, and its moisture resistance will be better.
4. Try to put the tacky sublimation paper in a dry environment. Don't put too much tacky sublimation paper on the carton at one time.
View our website to know more information... less
led by
gao bao
-
1
The development of injection Mold parts technology dates back to the invention of plastic substance itself. In 1847, the first condensation polymers were produced. John Wesley Hyatt’s introduction of the plastic derivative Celluloid reinvented the... moreThe development of injection Mold parts technology dates back to the invention of plastic substance itself. In 1847, the first condensation polymers were produced. John Wesley Hyatt’s introduction of the plastic derivative Celluloid reinvented the global manufacturing market. Hyatt, together with his brother, would later go on to construct the crude yet innovative prototype for the first ever injection molding machine in 1897.
Early in the 20th century, the invention of Bakelite gave rise to the everyday usage factor of plastics. Leading to the 1930s, the invention of major vinyl thermoplastics such as PVC and Polystyrene makes its way to becoming household essentials, even in the current day. With the rampages of World War II going on, the world’s industry sectors needed to call for cheaper means of mass production; leading to the breakout wonders of Nylon in 1941. From 1945 to the mid-50s saw the transition of Polyethylene to Polycarbonate. And the widespread use of injection molding methods in... less
led by
Jin hong
-
1
In case you missed it, see part one. rubber vulcanizing machine molding is one of three ways to form rubber; once the rubber compound is created it needs to be formed into its final product. This is accomplished by adding pressure and heat necessary to... moreIn case you missed it, see part one. rubber vulcanizing machine molding is one of three ways to form rubber; once the rubber compound is created it needs to be formed into its final product. This is accomplished by adding pressure and heat necessary to vulcanize the rubber. This guide will cover the various press vulcanization methods commonly used to mold rubber. Press vulcanization takes place in presses that supply pressure and heat. A very simple mold consists of two metal plates with cavities which conform to make the outside shape of the desired finished part. The presses hydraulically pushes plates heated by electricity steam or hot oil together vulcanizing the rubber. Molding processes can be classified under three broad headings: compression molding, transfer molding and injection molding. Compression molding involves placing properly shaped unvulcanized stock in each cavity of the mold; a cavity is the void where rubber will fill to form the shape of the finished product. The mold is then... less
led by
na bai
-
1
Pneumatic hose and tubing is used to deliver pressurized air to where it’s needed, such as tools, valves, and actuators. By taking a look at what’s available on today’s market, you’ll quickly see that there are many kinds and sizes of hose and... morePneumatic hose and tubing is used to deliver pressurized air to where it’s needed, such as tools, valves, and actuators. By taking a look at what’s available on today’s market, you’ll quickly see that there are many kinds and sizes of hose and tubing. For this reason, you should consider various factors to select a product that will be appropriate for its task.
The first thing of Pu Air Hose to look at is construction. Tubing used in air applications can be made from a single material or have internal reinforcements, usually with textile fibers, to provide greater strength. Pneumatic hose is usually made up of an inner tube, one or several layers of reinforcing fiber and an outer protective cover. In general, a pneumatic hose will be more rugged compared to tubing. However, it comes at a higher cost.
Your choice of tubing or hose will mainly be influenced by the type of air supply you use and its application. Hose or tubing size is influenced by the flow requirements. Specifications for... less
led by
snip snip
-
1
These pad printing basics of Syringe Pad Printing Machine will get you off the ground in no time. Pad printing is like a versatile version of screen printing that is used to transfer 2D images onto 3D objects. Pad printing equipment transfers images from... moreThese pad printing basics of Syringe Pad Printing Machine will get you off the ground in no time. Pad printing is like a versatile version of screen printing that is used to transfer 2D images onto 3D objects. Pad printing equipment transfers images from a printing plate, also known as a cliché. The cliché is flooded with ink and wiped clean so that there is only ink in the etched area. Pad printers use of a mixture of solvents and inks that become tacky when exposed to the air, increasing the ink’s ability to adhere to a silicone transfer pad. The pad is positioned over the cliché and pressed onto it in order to pick up the ink.
After the pad is lifted away from the cliché, it is pressed against a substrate, the surface that is to be printed. The pad deposits virtually all of the ink in the desired location and then lifts away from the substrate, ready for the next print cycle. Pad printers can accommodate both large and small runs.
A silicone pad is capable of picking up an image from a flat... less
led by
Zheng ri
-
1
By the early 1900s, gasoline cars started to outsell all other types of motor vehicles. The market of car assembly line was growing for automobiles and the need for industrial production was pressing.
The first car manufacturers in the world were French... moreBy the early 1900s, gasoline cars started to outsell all other types of motor vehicles. The market of car assembly line was growing for automobiles and the need for industrial production was pressing.
The first car manufacturers in the world were French companies Panhard & Levassor (1889) and Peugeot (1891). Daimler and Benz started out as innovators who experimented with car design to test their engines before becoming full car manufacturers. They made their early money by licensing their patents and selling their engines to car manufacturers.
The First Assemblers
Rene Panhard and Emile Levassor were partners in a woodworking machinery business when they decided to become car manufacturers. They built their first car in 1890 using a Daimler engine. The partners not only manufactured cars, they made improvements to the automotive body design.
Levassor was the first designer to move the engine to the front of the car and use a rear-wheel drive layout. This design was known as the Systeme Panhard and... less
led by
ri mei
-
1
1. No Need for Specialised Tools with Push-Fit Plastic Plumbing
Gone are the days when the plumber’s toolbox is heavier than their van. With plastic, plumbers and installers can arrive for a job with considerably less weight to carry, since fewer... more1. No Need for Specialised Tools with Push-Fit Plastic Plumbing
Gone are the days when the plumber’s toolbox is heavier than their van. With plastic, plumbers and installers can arrive for a job with considerably less weight to carry, since fewer specialist tools are required to install plastic fittings.
Unlike press fit methods of plumbing, plastic push-fit fittings introduced by plastic fittings factory require no tools at all for installations. Once cutting, measuring and deburring of the pipes has been completed, you only have to twist and lock the push-fit fitting to make the connection. In contrast, copper pipes and fittings require the use of a soldering iron, spanners, PTFE tape, and other items that can weigh down the toolbox.
2. Improve The Value of New Builds with Plastic Plumbing Fittings
New building developments are increasingly specifying plastic over copper for first fix plumbing, not only for ease of installation but because plastic can increase the value of a property over time.... less
led by
fitting tony
-
1
Printed Rain boots are a must-have piece of footwear for children which allows them to be out in any kind of weather without their feet getting cold and wet. Particularly with rain boots, it is important to ensure they are the right fit because there is... morePrinted Rain boots are a must-have piece of footwear for children which allows them to be out in any kind of weather without their feet getting cold and wet. Particularly with rain boots, it is important to ensure they are the right fit because there is no way to adjust the size. bisgaard's range of rain boots includes a variety of different shapes covering most types of fits.
Rain boots made from natural materials
bisgaard rain boots are made from natural rubber, which is a durable and soft material. Natural rubber is 100% waterproof and supple. This makes the rain boots flexible, comfortable, and easy to wear and walk around in.
Rain boots with both wide and narrow shafts
Our rain boots are designed in line with today's trends and fashion and come in many different colors as well as a variety of details and patterns. We sell rain boots for boys and girls, big and small. Our rain boots are designed to have a great fit while providing support and stability to the feet. We make rain boots with narrow... less
led by
hu jin
Share