Recent Entries

  • Oil Resistance V-Belts Should Not Be Exposed For Long Periods

    oil resistance V-Belt are probably the only elastic belts that work well at hot temperatures above 200oF. Works up to 230oF (110oC). Our high temperature urethane belts are exceptionally strong, durable and long lasting, but relatively expensive. Available only as round belts. Natural* color. 9...
  • Measuring Triangular Belts Profiles

    Real-life examples of measurements – all values below are measured with light touch of the caliper:   height of v-belts   nominal 10 mm; measured 9.3 – 9.7 mm (in convex curves, 9.8 mm)   width of v-belts   nominal 12.5 mm; measured 12.3 – 12.4 mm   Measuring triangular belts ...
  • How To Check The Triangle Belt

    Introduction to the daily maintenance and inspection methods of the triangular belts: Operators and users should master the correct operation essentials during normal driving. According to the technical requirements of the instruction manual, try to avoid sudden start and sudden braking; also preve...
  • How To Install The V-belt

    We recommend the installation of the triangular belts: Before installation, if the center distance of the two shafts is adjustable, the center distance should be shortened first, and then the center distance should be adjusted as required after the tape is installed; if the center distance of the t...
  • What Are The Advantages Of High-performance V-belts

    For High Performance V-Belts, what are the common materials for V-belts?    There are currently 5 kinds of materials used to produce cast pulleys on the market: cast aluminum, cast iron, cast steel, engineering plastics, and ordinary plastics. Due to the status quo of industry segmentation, differe...