The Difference Between Injection Molding Machine and Rubber Ext

    1. The working principle is different
    2. Injection molding machine

    The working principle of the injection molding machine is similar to the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous flow state) into the closed mold cavity. The process of obtaining the product after curing and shaping.

    Injection molding is a cyclic process, each cycle mainly includes: quantitative feeding-melting plasticization-pressure injection-mold filling and cooling-mold opening and taking parts. After taking out the plastic part, the mold is closed again for the next cycle.

    1. Extruder

    A single screw rubber extruder machine is generally divided into three sections in effective length. The effective length of the three sections is determined according to the diameter, pitch and depth of the screw, which are generally divided into one-third of each.

    The last thread of the material port is called the conveying section: the material must not be plasticized here, but it must be preheated and compacted. In the past, the old extrusion theory believed that the material here is loose, and later proved that the material here is actually The solid plug means that the material here is a solid like a plug after being squeezed, so as long as the conveying task is completed, it is its function.

    Two, the characteristics are different
    1. Injection molding machine

    The injection device and the clamping device are on the same vertical centerline, and the mold is opened and closed in the up and down direction. Its floor space is only about half of that of a horizontal machine, so it is about twice as productive when converted into floor space.

    1. Extruder

    The safety items that the extruder should pay attention to when extruding are: electricity, heat, mechanical rotation, and the loading and unloading of bulky parts. The extruder workshop must be equipped with lifting equipment, assembling and disassembling the head, screw and other heavy parts to ensure safe production.

    Three, the classification is different

    1. Injection molding machine

    Classified by plasticization method

    1) Plunger plastic injection molding machine

    It has poor mixing properties and poor plasticization properties, so it is necessary to install a shunt shuttle device. Has been rarely used.

    2) Reciprocating screw type plastic injection molding machine;

    Relying on the screw for plasticization and injection, the mixing and plasticizing properties are very good, and the most used.

    3) Screw-the plunger plastic injection molding machine relies on the screw for plasticization and the plunger for injection, the two processes are separated.

    1. Extruder

    Plastic extruders are divided into twin screw extruders and single screw extruders.

    Welcome to buy rubber curing oven from Baina!